yasky wrote:ill grab the 3" one.
I'm assuming that you're the one who has made the purchase via paypal tonight?
If not, I'm now out of stock but should have 2 more in 3inch by the end of this week or early next week.
Kind regards
Michael
Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T - LAST THREE!!!
Re: Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T
Michael,
Do you still have two 3" dump pipes or can have two made up?
If so I'd like to get a shipping cost to york, pa 17406 USA.
Thanks.
Do you still have two 3" dump pipes or can have two made up?
If so I'd like to get a shipping cost to york, pa 17406 USA.
Thanks.
Re: Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T
Id like to put one on the wizard (3.1td) but its an automatic, so would 3' be to big or will it be ok?
plus can you make these dump pipes in stainless?
plus can you make these dump pipes in stainless?
Re: Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T
Also want one but 2.5", if anyone hears from him plz let me know as I need one ASAP but he doesn't seem to be on here lately..
Re: Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T
MUVIT,
I would think the bell housings on the auto or manual would be close enough in shape that it would not matter.
That said my application is also automatic, so hopefully when BrokenMu comes back he will confirm that 3" will work with autos.
I would think the bell housings on the auto or manual would be close enough in shape that it would not matter.
That said my application is also automatic, so hopefully when BrokenMu comes back he will confirm that 3" will work with autos.
Re: Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T
It might pay to send him a PM as he hasn't been on here since mid February
Re: Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T
He is out of the laser cut flanges, I am assuming he is out of stock on the pipes as well right now.
Re: Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T
Hello everyone,
My sincere apologies for the lack of communication on my end and any inconvenience it may have caused. I had a string of bad experiences through eBay and I believe one from the forum, mainly people who were told that dump pipe would not fit their late model Rodeo's yet insisted on purchasing one and then wanted a refund with me covering the costs of postage etc. This coupled with the fact that the laser cuter that I was using let me down on delivery over Christmas last year and left me in the dark for a number of weeks made me hesitant to continue doing business. There is not a great deal of profit from these products in my pocket at the end of the day, but it does pay for the beer.
Some of you will know, as you contacted me via phone or email, that I did make up a handful of dump pipes for people who were serious buyers who knew what they wanted.
However, I've recently come across a new laser cutter who is willing to cut the flanges for me in the small quantities that I was getting before. I'll be getting a batch of approximately 5 sets of EGR block offs soon as well as a batch of 10 flange plates and I will endeavor to keep you all updated.
Dinger95 wrote:Michael,
Do you still have two 3" dump pipes or can have two made up?
If so I'd like to get a shipping cost to york, pa 17406 USA.
Thanks.
Hi Dinger95, the postage is always the killer when it comes to international postage. Each dump pipe weighs between 2-3 kg's.
The dump pipes would be $200 each and the postage;
@ 5 - 5.5kg's Via Sea Mail: approx $80
@ 5 - 5.5kg's Via Air Mail: approx $120
@ 5.5 - 6kg's Via Sea Mail: approx $90
@ 5.5 - 6kg's Via Air Mail: approx $130
Express post international is +$10 on each of the Air Mail costs which would also come with Tracking. Since you're after two dump pipes, I'm guessing you have a friend who is interested also, once the postage cost is split up between the two of you, it's about double the price of standard post within Australia, so not too bad.
MUVIT wrote:Id like to put one on the wizard (3.1td) but its an automatic, so would 3' be to big or will it be ok?
plus can you make these dump pipes in stainless?
As Dinger Said, there's not much difference in the size of the trans. I might be able to do it in stainless, I'll ask a few questions of my own, get prices of the piping and let you know if you're still keen. Keep in mind there will be extra costs involved as I'll have to get a one off stainless flange plate also.
haven wrote:Also want one but 2.5", if anyone hears from him plz let me know as I need one ASAP but he doesn't seem to be on here lately..
I should be able to get one ready by early next week if you're still interested.
If any of you have already dealt with me outside of the forum, disregard my reply here.
kind regards
Michael
My sincere apologies for the lack of communication on my end and any inconvenience it may have caused. I had a string of bad experiences through eBay and I believe one from the forum, mainly people who were told that dump pipe would not fit their late model Rodeo's yet insisted on purchasing one and then wanted a refund with me covering the costs of postage etc. This coupled with the fact that the laser cuter that I was using let me down on delivery over Christmas last year and left me in the dark for a number of weeks made me hesitant to continue doing business. There is not a great deal of profit from these products in my pocket at the end of the day, but it does pay for the beer.
Some of you will know, as you contacted me via phone or email, that I did make up a handful of dump pipes for people who were serious buyers who knew what they wanted.
However, I've recently come across a new laser cutter who is willing to cut the flanges for me in the small quantities that I was getting before. I'll be getting a batch of approximately 5 sets of EGR block offs soon as well as a batch of 10 flange plates and I will endeavor to keep you all updated.
Dinger95 wrote:Michael,
Do you still have two 3" dump pipes or can have two made up?
If so I'd like to get a shipping cost to york, pa 17406 USA.
Thanks.
Hi Dinger95, the postage is always the killer when it comes to international postage. Each dump pipe weighs between 2-3 kg's.
The dump pipes would be $200 each and the postage;
@ 5 - 5.5kg's Via Sea Mail: approx $80
@ 5 - 5.5kg's Via Air Mail: approx $120
@ 5.5 - 6kg's Via Sea Mail: approx $90
@ 5.5 - 6kg's Via Air Mail: approx $130
Express post international is +$10 on each of the Air Mail costs which would also come with Tracking. Since you're after two dump pipes, I'm guessing you have a friend who is interested also, once the postage cost is split up between the two of you, it's about double the price of standard post within Australia, so not too bad.
MUVIT wrote:Id like to put one on the wizard (3.1td) but its an automatic, so would 3' be to big or will it be ok?
plus can you make these dump pipes in stainless?
As Dinger Said, there's not much difference in the size of the trans. I might be able to do it in stainless, I'll ask a few questions of my own, get prices of the piping and let you know if you're still keen. Keep in mind there will be extra costs involved as I'll have to get a one off stainless flange plate also.
haven wrote:Also want one but 2.5", if anyone hears from him plz let me know as I need one ASAP but he doesn't seem to be on here lately..
I should be able to get one ready by early next week if you're still interested.
If any of you have already dealt with me outside of the forum, disregard my reply here.
kind regards
Michael
Re: Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T
cheers for the reply
Re: Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T
Update.
Over the past fortnight I've been trying to make up dump pipes for stock, ready to sell and ship, but there were simply too many orders coming in.
Anyhow, I now have 3 dump pipes in 3inch and 1 in 2.5inch in stock and ready to sell.
Kind regards
Michael
Over the past fortnight I've been trying to make up dump pipes for stock, ready to sell and ship, but there were simply too many orders coming in.
Anyhow, I now have 3 dump pipes in 3inch and 1 in 2.5inch in stock and ready to sell.
Kind regards
Michael