Dump Pipes in 2.5" OR 3" to suit 4JB1T/4JG2T - LAST THREE!!!
Posted: Wed Dec 08, 2010 7:55 am
ITEM: Mandrel bent dump pipes with divorced wastegate setup to suit 4JB1T and 4JG2T, made from 2.5" or 3" mild steel.
This will only fit motors fitted with the downward facing oil cooler/filter housing.
I myself have a 2.8 motor which had the upward facing filter housing. I purchased a 3.1 oil cooler from from the wreckers and fitted with no troubles. If you're going to do the same, you'll require some 16mm heater hose, 3 elbow joins and 6 extra hose clamps.
If you are struggling to find a suitable oil filter housing, let me know and I can assist you with finding one.
These dump pipes will bolt straight onto your turbo, but they will not bolt straight to the rest of your standard exhaust system. If you're not looking to get a complete new exhaust system, Any exhaust shop will be able to cut your existing system at the appropriate point to mate it up with one of these dump pipes.
CONDITION: Brand new
PRICE AND PRICE CONDITIONS: (AUS) $200 plus postage - $30 within Australia - $50 to New Zealand
PayPal links - because they make things easier for everyone
Always handy for NZ residents as it helps you avoid $25 bank fees for transferring funds to an over seas bank account.
Australian residents - https://www.paypal.com/cgi-bin/webscr?c ... 87R8Z48JQ8
New Zealand residents - https://www.paypal.com/cgi-bin/webscr?c ... CN9ETEDLB6
Other methods of payment also available, just let me know your preferred method and we'll work something out
[color=#FF0000]Please indicate whether you'd like 3" or 2.5"
[b]PICTURES: Only have pictures of one installed at the moment, See below for out of car pictures.
Kind regards
Michael
This will only fit motors fitted with the downward facing oil cooler/filter housing.
I myself have a 2.8 motor which had the upward facing filter housing. I purchased a 3.1 oil cooler from from the wreckers and fitted with no troubles. If you're going to do the same, you'll require some 16mm heater hose, 3 elbow joins and 6 extra hose clamps.
If you are struggling to find a suitable oil filter housing, let me know and I can assist you with finding one.
These dump pipes will bolt straight onto your turbo, but they will not bolt straight to the rest of your standard exhaust system. If you're not looking to get a complete new exhaust system, Any exhaust shop will be able to cut your existing system at the appropriate point to mate it up with one of these dump pipes.
CONDITION: Brand new
PRICE AND PRICE CONDITIONS: (AUS) $200 plus postage - $30 within Australia - $50 to New Zealand
PayPal links - because they make things easier for everyone
Always handy for NZ residents as it helps you avoid $25 bank fees for transferring funds to an over seas bank account.Australian residents - https://www.paypal.com/cgi-bin/webscr?c ... 87R8Z48JQ8
New Zealand residents - https://www.paypal.com/cgi-bin/webscr?c ... CN9ETEDLB6
Other methods of payment also available, just let me know your preferred method and we'll work something out
[color=#FF0000]Please indicate whether you'd like 3" or 2.5"
[b]PICTURES: Only have pictures of one installed at the moment, See below for out of car pictures.
Kind regards
Michael
